{
  "passed": true,
  "count": 14,
  "checks": [
    {
      "name": "80 STEP roundtrip",
      "actual": 2.160641926236539e-15,
      "criterion": "< 1e-7 relative volume change",
      "passed": true
    },
    {
      "name": "80 all solids valid",
      "actual": 51,
      "criterion": "all parts valid",
      "passed": true
    },
    {
      "name": "80 product swept clearance",
      "actual": 0.0,
      "criterion": "< 1e-6 mm3 interference",
      "passed": true
    },
    {
      "name": "120 STEP roundtrip",
      "actual": 1.9445777336128853e-15,
      "criterion": "< 1e-7 relative volume change",
      "passed": true
    },
    {
      "name": "120 all solids valid",
      "actual": 51,
      "criterion": "all parts valid",
      "passed": true
    },
    {
      "name": "120 product swept clearance",
      "actual": 0.0,
      "criterion": "< 1e-6 mm3 interference",
      "passed": true
    },
    {
      "name": "180 STEP roundtrip",
      "actual": 8.642567704946156e-16,
      "criterion": "< 1e-7 relative volume change",
      "passed": true
    },
    {
      "name": "180 all solids valid",
      "actual": 51,
      "criterion": "all parts valid",
      "passed": true
    },
    {
      "name": "180 product swept clearance",
      "actual": 0.0,
      "criterion": "< 1e-6 mm3 interference",
      "passed": true
    },
    {
      "name": "Continuous carriage/support clearance",
      "actual": 77.0,
      "criterion": "> 0 mm",
      "passed": true
    },
    {
      "name": "Continuous carriage separation",
      "actual": 66.0,
      "criterion": "> 0 mm",
      "passed": true
    },
    {
      "name": "Worst-case product clearance",
      "actual": 1.03,
      "criterion": "> 0 mm per side",
      "passed": true
    },
    {
      "name": "Plunger diametral clearance",
      "actual": 0.15000000000000036,
      "criterion": "positive sliding clearance",
      "passed": true
    },
    {
      "name": "Clamp bolt captive washer",
      "actual": 9,
      "criterion": "washer OD exceeds slot width",
      "passed": true
    }
  ],
  "command": "python run.py && python test_project.py"
}